Designing Premises Cabling Systems NETCONNECT ACT III

Course code

ND3803

Duration

2 Days, 16 Acad. Hours

Download pdf

Course Overview

Objectives

Prerequisites

Course Outline

Course Overview

Course overview

This CommScope NETCONNECT course is approximately 75% hands-on, and prepares the individual to handle the many design criteria decisions associated with premises cabling systems. The student will progress through a step-by-step process from the initial design analysis through the final project presentation. There is an emphasis on the design parameters and guidelines of the ANSI/TIA and ISO/IEC standards, and the decisions that the designer has to make regarding network platforms and technologies, cabling architectures, and media selection.

Objectives

Learn what information gathering is necessary at the project offset
Understand the standards that influence and dictate design
Make clear the steps required in a successful infrastructure design project
Practice network design through a number of real world design projects and workshops
Successfully present your design as part of small work groups
Gain confidence and skills from the focus on design quality and innovative design choices

Audience

Designers, Consultants and experienced installers involved in Premises Cabling project planning, implementation and certification and are designing with the CommScope NETCONNECT premises solution and who prefer to take a class rather than the Online SP3000 version of the ACT III course. (May not be available in all regions).

Prerequisites

Prerequisities for this course

Ideally students will have had some exposure to the enterprise infrastructure market but this is not mandatory.

Course Outline

Course outline

Information Gathering & Design Analysis

Identify how and where to gather information and obtain customer expectations, and how to analyze the data.
Describe the impact that customer expectations may have upon architectural and media selection decisions.

Telecommunications Infrastructure

List and describe the purpose of the standards organizations
Describe the elements of the cabling system and how they fit into the overall design plan.

Placement of Spaces

Describe the requirements and guidelines for the placement of spaces, including Telecommunications Outlets, Telecommunications Rooms, and
Equipment Rooms.
Determine the placement of the elements on a typical floor plan blueprint.

Horizontal Cabling & Pathways

Review the parameters, specifications and design guidelines for the Horizontal cabling system, including:
- Topology
- Media requirements
- Connector requirements
- Telecommunications Outlet and Telecommunications Room connectivity
- Cabling distances
- Installation/cabling practices
- Horizontal pathways
- Provide a horizontal cabling solution to an actual design project.

Backbone Cabling & Pathways

Review the parameters, specifications and design guidelines for the Backbone cabling system, including:
- Topology
- Media requirements
- Connector requirements
- Cabling distances

Administration and Grounding & Bonding

Describe the basic principles of Administration and the Grounding and Bonding of telecommunications cabling systems.
Apply these principles to the previous actual design solution.

Centralized Cabling Architecture

Describe the implementation, advantages, and requirements of a Centralized Optical Fiber Cabling implementation according to the standards.
Provide a Centralized Optical Fiber Cabling solution to an actual design project.

Open Office Architecture

Describe the implementation, advantages, and requirements of an Open Office (Zone) Cabling implementation according to the standards.
Provide an Open Office Cabling solution to an actual design project.

Back to trainings (Commscope)

Request the training

Designing Premises Cabling Systems NETCONNECT ACT III

Course code:

ND3803

Duration:

2 Days, 16 Acad. Hours

Apply

Download pdf