Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Course code

ENARSI

Duration

5 Days, 40 Acad. Hours

Download pdf

Course Overview

Objectives

Prerequisites

Course Outline

Course Overview

Description
The Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) training gives you the knowledge and skills needed to install, configure, operate, and troubleshoot a dual stack enterprise network. This training covers advanced routing and infrastructure technologies, expanding on the topics covered in the Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) training.
This training prepares you for the 300-410 ENARSI v1.1 exam. If passed, you earn the Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation certification and satisfy the concentration exam requirement for the Cisco Certified Network Professional (CCNP) Enterprise certification. This training also earns you 40 Continuing Education (CE) credits towards recertification.

How you’ll benefit
This training will help you:
• Gain the knowledge you need to install, configure, operate, and troubleshoot a dual stack enterprise network
• Qualify for professional-level job roles in advance routing and services
• Prepare for the 300-410 ENARSI 1.0 exam
• Earn 40 CE credits toward recertification

Technology areas
• Enterprise Networking
• Routing and Switching

Objectives

Objectives
• Configure, optimize, and troubleshoot enhanced interior gateway routing protocol (EIGRP)
• Configure, optimize, and troubleshoot open shortest path first (OSPF)v2 and OSPFv3
• Implement and troubleshoot route redistribution using filtering mechanisms
• Implement and troubleshoot path control using policy-based routing (PBR) and IP service level agreement (SLA)
• Configure, optimize, and troubleshoot border gateway protocol (BGP)
• Implement multiprotocol BGP (MP-BGP)
• Describe the features of multiprotocol label switching (MPLS)
• Describe the major architectural components of an MPLS virtual private network (VPN)
• Identify the routing and packet forwarding functionalities for MPLS VPNs
• Explain how packets are forwarded in an MPLS VPN environment
• Implement Cisco internetwork operating system (IOS®) dynamic multipoint VPNs (DMVPNs)
• Implement and troubleshoot dynamic host configuration protocol (DHCP)
• Describe the tools available to secure the IPV6 first hop
• Troubleshoot Cisco router security features
• Troubleshoot infrastructure security and services
• Troubleshoot network issues with Cisco DNA Center Assurance

Prerequisites

Prerequisites
There are no prerequisites for this training. However, the knowledge and skills you are recommended to have before attending this training are:
• General understanding of network fundamentals
• Basic knowledge of local area network (LAN) implementation
• General understanding of network device management and security
• Basic knowledge of network automation
• General understanding of interior gateway protocol (IGP) routing, including EIGRP and OSPF
• General understanding of BGP
• General understanding of infrastructure security and services, including access control lists (ACLs), simple
network management protocol (SNMP), DHCP, IP SLA, Syslog, authentication, authorization, and accounting (AAA), and control plane policing (CoPP)

These skills can be found in the following Cisco Learning Offerings:
• Implementing and Administering Cisco Solutions (CCNA)
• Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR)

Who should enroll
• Entry-Level Network Engineers
• Network Administrators
• Network Support Technicians
• Help Desk Technicians

Course Outline

Outline

Implementing EIGRP
Optimizing EIGRP
Troubleshooting EIGRP
Implementing OSPF
Optimizing OSPF
Troubleshooting OSPF
Configuring Redistribution
Troubleshooting Redistribution
Implementing Path Control
Implementing IBGP
Optimizing BGP
Implementing MP-BGP
Troubleshooting BGP
Exploring MPLS
Introducing MPLS L3 VPN Architecture
Introducing MPLS L3 VPN Routing
Configuring VRF-Lite
Implementing DMVPN
Implementing DHCP
Introducing IPv6 First Hop Security
Securing Cisco Routers
Troubleshooting Infrastructure Security and Services
Troubleshooting with DNA Center Assurance

Lab Outline

Configure EIGRP Using Classic Mode and Named Mode for IPv4 and IPv6
Verify the EIGRP Topology Table
Configure EIGRP Stub Routing, Summarization, and Default Routing
Configure EIGRP Load Balancing and Authentication
Troubleshoot EIGRP Issues
Configure OSPFv3 for IPv4 and IPv6
Verify the Link-State Database
Configure OSPF Stub Areas and Summarization
Configure OSPF Authentication
Troubleshoot OSPF Issues
Implement Routing Protocol Redistribution
Manipulate Redistribution
Manipulate Redistribution Using Route Maps
Troubleshoot Redistribution Issues
Implement PBR
Configure IBGP and EBGP
Implement BGP Path Selection
Configure BGP Advanced Features
Configure BGP Route Reflectors
Configure MP-BGP for IPv4 and IPv6
Troubleshoot BGP Issues
Configure Routing with VRF-Lite
Implement Cisco IOS DMVPN
Obtain IPv6 Addresses Dynamically
Troubleshoot DHCPv4 and DHCPv6 Issues
Troubleshoot IPv4 and IPv6 ACL Issues
Configure and Verify uRPF
Troubleshoot Network Management Protocol Issues: Lab 1
Troubleshoot Network Management Protocol Issues: Lab 2

What to expect on the exam
Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) v1.1 is a 90-minute exam associated with the Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation certification and satisfies the core exam requirement for the CCNP Enterprise certification.
This exam tests your knowledge of implementing and troubleshooting for advanced routing technologies and services, including:
• Layer 3
• VPN services
• Infrastructure security
• Infrastructure services

Back to trainings (CCNP Enterprise)

Request the training

Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Course code:

ENARSI

Duration:

5 Days, 40 Acad. Hours

Apply

Download pdf