Designing Premises Cabling Systems NETCONNECT ACT III
Код курса
ND3803
Продолжительность
2 Дней, 16 Ак. Часов
Описание курса
Цели
Требования
Программа курса
Описание курса
Course overview
This CommScope NETCONNECT course is approximately 75% hands-on, and prepares the individual to handle the many design criteria decisions associated with premises cabling systems. The student will progress through a step-by-step process from the initial design analysis through the final project presentation. There is an emphasis on the design parameters and guidelines of the ANSI/TIA and ISO/IEC standards, and the decisions that the designer has to make regarding network platforms and technologies, cabling architectures, and media selection.
Цели
Objectives
- Learn what information gathering is necessary at the project offset
- Understand the standards that influence and dictate design
- Make clear the steps required in a successful infrastructure design project
- Practice network design through a number of real world design projects and workshops
- Successfully present your design as part of small work groups
- Gain confidence and skills from the focus on design quality and innovative design choices
Audience
- Designers, Consultants and experienced installers involved in Premises Cabling project planning, implementation and certification and are designing with the CommScope NETCONNECT premises solution and who prefer to take a class rather than the Online SP3000 version of the ACT III course. (May not be available in all regions).
Требования
Prerequisities for this course
- Ideally students will have had some exposure to the enterprise infrastructure market but this is not mandatory.
Программа курса
Course outline
Information Gathering & Design Analysis
- Identify how and where to gather information and obtain customer expectations, and how to analyze the data.
- Describe the impact that customer expectations may have upon architectural and media selection decisions.
Telecommunications Infrastructure
- List and describe the purpose of the standards organizations
- Describe the elements of the cabling system and how they fit into the overall design plan.
Placement of Spaces
- Describe the requirements and guidelines for the placement of spaces, including Telecommunications Outlets, Telecommunications Rooms, and
Equipment Rooms. - Determine the placement of the elements on a typical floor plan blueprint.
Horizontal Cabling & Pathways
- Review the parameters, specifications and design guidelines for the Horizontal cabling system, including:
- Topology
- Media requirements
- Connector requirements
- Telecommunications Outlet and Telecommunications Room connectivity
- Cabling distances
- Installation/cabling practices
- Horizontal pathways
- Provide a horizontal cabling solution to an actual design project.
Backbone Cabling & Pathways
- Review the parameters, specifications and design guidelines for the Backbone cabling system, including:
- Topology
- Media requirements
- Connector requirements
- Cabling distances
Administration and Grounding & Bonding
- Describe the basic principles of Administration and the Grounding and Bonding of telecommunications cabling systems.
- Apply these principles to the previous actual design solution.
Centralized Cabling Architecture
- Describe the implementation, advantages, and requirements of a Centralized Optical Fiber Cabling implementation according to the standards.
- Provide a Centralized Optical Fiber Cabling solution to an actual design project.
Open Office Architecture
- Describe the implementation, advantages, and requirements of an Open Office (Zone) Cabling implementation according to the standards.
- Provide an Open Office Cabling solution to an actual design project.
