Fast Track for Deploying HPE FlexNetwork Comware
![]() |
Код: H8D09S | ![]() |
Предварительная запись | ![]() |
Кол-во часов: 40 , Кол-во дней: 5 | ||
Audience
Prerequisites
Course Outline
- Introduction
- Course overview and objectives
- Basic Setup
- Initiate a console connection to an HPE Comware switch
- Describe characteristics and purpose of each Privilege Level
- Navigate the Comware CLI
- Perform basic configuration
- Configure interfaces
- Troubleshoot common problems with basic connectivity
- Protecting Management Access
- Apply password protection to local and remote authentication
- Associate user roles with password and scheme authentication
- Implement remote management with telnet, SSH, web, and SNMP access
- Managing Software and Configurations
- Understand the boot up process of Comware switches
- Use the Comware device flash file system
- Upgrade the Comware switch operating system
- Manage configuration files on Comware switches
- VLANs
- Understand the use of VLANs and the various types of VLAN
- Choose the correct VLAN port type for various situations
- Configure VLANs and assign IP addresses to VLAN interfaces Implement basic routing on directly connected VLANs
- Verify connectivity within and between VLANs
- IP Services
- DHCP server and DHCP relay
- NTP
- Logging
- DNS
- Spanning Tree Protocol
- Understand the operation of the original IEEE 802.1D standard (pre-2004)
- Recognize the enhancements included in RSTP
- Understand the implementation of PVST+
- List the components and load sharing benefits of MSTP
- Configure MSTP
- Configure STP security features
- Link Aggregation
- Understand the problems and limitations of STP and load sharing
- Differentiate between static and dynamic link aggregation
- Understand how the Link Aggregation Control Protocol works (LACP)
- Configure link aggregation on Comware switches
- Troubleshoot link aggregation on Comware switches
- IRF
- Understand the technologies and concepts involving IRF
- Understand the advantages that IRF provides
- Describe a split stack and how the Multi-Active Detection (MAD) protocol deals with this problem
- Configure a simple IRF topology
- Verify and troubleshoot an IRF topology
- Basic IP Routing
- Describe how Comware switches forward traffic between directly connected VLANs
- Configure static routes on a Comware switch - Describe the basic operation of RIP
- Describe the basic operation of OSPF and configure single-area OSPF
- Deploy HPE products in single-area and multiple-area OSPF systems
- Use area definitions and summaries to create efficient and scalable, multiple-area designs
- Advertise routes to external networks in a variety of OSPF environments
- Promote fast, effective convergence during a variety of failover situations
- Use virtual links as required to establish nondirect connections to the backbone
- Implement OSFP authentication
- Access Control Lists
- Define ACL and identify the criteria by which ACLs select traffic
- Configure ACLs on HPE Comware based switches to select given traffic
- Apply static ACLs to interfaces to meet the needs of a particular scenario
- Examine an ACL configuration and determine the action taken on specific packets
- Quality of Service
- Configure HPE switches to honor the appropriate QoS marks applied by other devices
- Create a QoS policy that assigns a specified class of traffic to a priority queue
- Select and implement an appropriate strategy for queue scheduling
- Implement traffic policing policies that enforce the negotiated committed information rate (CIR), committed burst size (CBS), peak information rate (PIR), and excessive burst size (EBS) for a specified class of traffic
- Respond to congestion in advance by applying the appropriate traffic shaping and Weighted Random Early Detection (WRED) policies
- Determine the QoS mark that an HPE switch will assign to specific outbound traffic and, if necessary, adjust the mark
- BGP
- Establish and monitor eBGP sessions between your routers and Internet Service Provider (ISP) routers
- Advertise an IP block to multiple ISP routers
- Filter BGP routes as required for a dual-homed ISP connection
- Configure a BGP router to advertise a default route in OSPF or to redistribute and aggregate BGP routes, as appropriate
- Multicast
- Route multicast traffic using Protocol Independent Multicast-Dense Mode (PIM-DM) or Protocol Independent Multicast-Sparse Mode (PIM-SM)
- Select and configure rendezvous points (RPs) based on particular environmental needs such as redundancy and efficient operation
- Minimize unnecessary multicast flooding
- Apply advanced controls such as source-specific multicasting (SSM) and administrative scopes to a PIM-SM deployment
Ссылка курса обучения | http://muk.training/courses/hp_networking/8785/ |
Назад в раздел |
Для предварительной записи на курсы или
уточнения информации позвоните по телефонам: (044) 492-29-29, 594-98-98 ( УЦ МУК )

Форма регистрации заполняется тут.