Каталог курсов

Курсы AMP NETCONNECT

Designing Premises Cabling Systems NETCONNECT ACT III

 
Код курса  Код: ND3803    Заявка  Предварительная запись    Продолжительность  Кол-во часов: 16 , Кол-во дней: 2



This CommScope NETCONNECT course is approximately 75% hands-on, and prepares the individual to handle the many design criteria decisions associated with premises cabling systems. The student will progress through a step-by-step process from the initial design analysis through the final project presentation. There is an emphasis on the design parameters and guidelines of the ANSI/TIA and ISO/IEC standards, and the decisions that the designer has to make regarding network platforms and technologies, cabling architectures, and media selection.

Audience

Designers, Consultants and experienced installers involved in Premises Cabling project planning, implementation and certification and are designing with the CommScope NETCONNECT premises solution and who prefer to take a class rather than the Online SP3000 version of the ACT III course. (May not be available in all regions).

Pre-requisite Experience

Ideally students will have had some exposure to the enterprise infrastructure market but this is not mandatory.

Objectives

  • Learn what information gathering is necessary at the project offset
  • Understand the standards that influence and dictate design
  • Make clear the steps required in a successful infrastructure design project
  • Practice network design through a number of real world design projects and workshops
  • Successfully present your design as part of small work groups
  • Gain confidence and skills from the focus on design quality and innovative design choices

Key Topics (delivery may vary regionally)

Information Gathering & Design Analysis

  • Identify how and where to gather information and obtain customer expectations, and how to analyze the data.
  • Describe the impact that customer expectations may have upon architectural and media selection decisions.

Telecommunications Infrastructure

  • List and describe the purpose of the standards organizations
  • Describe the elements of the cabling system and how they fit into the overall design plan.

Placement of Spaces

  • Describe the requirements and guidelines for the placement of spaces, including Telecommunications Outlets, Telecommunications Rooms, and Equipment Rooms.
  • Determine the placement of the elements on a typical floor plan blueprint.

Horizontal Cabling & Pathways

  • Review the parameters, specifications and design guidelines for the Horizontal cabling system, including:
  • Topology
  • Media requirements
  • Connector requirements
  • Telecommunications Outlet and Telecommunications Room connectivity
  • Cabling distances
  • Installation/cabling practices
  • Horizontal pathways
  • Provide a horizontal cabling solution to an actual design project.

Backbone Cabling & Pathways

  • Review the parameters, specifications and design guidelines for the Backbone cabling system, including:
  • Topology
  • Media requirements
  • Connector requirements
  • Cabling distances

Administration and Grounding & Bonding

  • Describe the basic principles of Administration and the Grounding and Bonding of telecommunications cabling systems.
  • Apply these principles to the previous actual design solution.

Centralized Cabling Architecture

  • Describe the implementation, advantages, and requirements of a Centralized Optical Fiber Cabling implementation according to the standards.
  • Provide a Centralized Optical Fiber Cabling solution to an actual design project.

Open Office Architecture

  • Describe the implementation, advantages, and requirements of an Open Office (Zone) Cabling implementation according to the standards.
  • Provide an Open Office Cabling solution to an actual design project.

 


Ссылка курса обучения
Назад в раздел

Свежие новости

13.11.2017 Бесплатные практические вебинары MICROSOFT
Приглашение на бесплатные практические вебинары "Portal and billing MUK CSP" и "Trials and reseller’s Storefront" для партеров на базе Учебного центра МУК

06.11.2017 Со скидкой 20,18% на все курсы IBM с Учебным центром МУК в 2018 год

Планируйте курсы IBM на 2018 год вместе с нами до 31 декабря 2017 и получайте скидку 20,18%.

31.10.2017 HPE Education Brunch in Tbilisi 2017 собрал партнеров и заказчиков со всей Грузии

19 октября 2017 года прошло масштабное мероприятие - HPE Education Brunch in Tbilisi 2017 - организованное Учебным центром МУК Грузия совместно с Hewlett Packard Enterprise.

11.10.2017 Мобильный тестовый центр Pearson VUE в Учебном центре МУК
С октября 2017 на базе Учебного центра МУК начал свою работу Мобильный тестовый центр Pearson VUE